Ender 3 V3 Plus Cable Strain Relief
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cable strain relief for the Ender 3 V3 Plus toolhead (may work on Ender 3 V3 Core XZ but untested)
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 301
- Wydruki
- 0
- Wyświetlenia
- 1201
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I was getting frustrated with how the cable would drag, especially after having bypassed the ptfe tube after integrating the filament runout sensor into the extruder (find here). But it was annoying me before.
I printed it with the end without the prongs as the base without supports in ASA at 40% infill, 4 walls. If you aren't planning on printing in an enclosure you could likely get away with PLA or PETG. I still ultimately have added some spring wire to help guide the cable especially because when printing in an enclosure the cable gets more flimsy. Again may not need it but if you do I got mine from KB3D for like $6 total (not an affiliate just found it for cheap).
Step file included in case the Ender 3 V3 is different and it can be remixed with more ease.