FIRST Robotics 2025 Reefscape Scoring Pipe Couplings for PVC Pipe Practice Towers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
FIRST Robotics Competition 2025 Reef Scoring Pipe Couplings for PVC Pipe Practice Setup
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 183
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Build your own Reef Scoring Pipes for the 2025 FIRST® Robotics Competition Reefscape game. The game requires scoring towers built with very specific angles and these couplers allow you to use standard 1.5 inch PVC pipe from the hardware store to build your own for practice.
These files have been designed to be printed on their end as they would be installed, with no supports needed. To fix the couplers in place, use #8 screws that are about ¾ inch long. Refer to the FIRST® Robotics Reefscape Game Materials for the correct lengths and dimensions when building your practice towers.
| Pipes | 1.5 inch Diameter, Schedule 40 PVC Pipe |
| Screws | #8 x ¾ inch or Similar |
I have provided both 3MF files for printing as-is, as well as the original F3Z files for editing in Fusion 360 or other compatible software.
I am providing these models free of charge so everyone can benefit from them. These models have been created by me, however they are based on information that is the sole property of FIRST®.