1 / 4
GPS + XT60 + VTX Antenna holder for iFlight Nazgul DC5 (Eco) — zdjęcie 1
1 / 4

GPS + XT60 + VTX Antenna holder for iFlight Nazgul DC5 (Eco)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lightweight holder for GPS, a fixed XT60 and VTX Antennas for iFlight Nazgul DC5.

Ocena
0 / 5
Polubienia
8
Pobrania
131
Wydruki
0
Wyświetlenia
668
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Holder for GPS, VTX Antennas (in my case DJI O3, but others with SMA adapters also work) and a fixed XT-60 for easy plug in of the battery.

Print the main part in TPU and two spacers in a rigid material like PETG or PLA. 
The advantage of the split into two parts is that you can easily bend the TPU part open, to remove support and to install the wires an antennas. Then it gets  quite rigid, due to the shape and spacer fixing the TPU part.

 

Features:

  • Lightweight at 9g for all printed parts
  • Minimal length addition
  • Reduced flex of the GPS due to the triangular support
  • Thin layer at the bottom protects cables

Compatible components used:

  • Frame: iFlight Nazgul DC5 (Eco), (The regular Nazgul 5 V3 likely is also compatible)
  • GPS: HLGRC M100-5883
  • 2x SMA Antenna Adapters
  • XT60E-M (XT60 with screw mount)

 

Tagi