1 / 2
Waveshare UPS Module 3S Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case for the Waveshare UPS Module 3S. Commonly used to power Raspberry Pi Boards
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 103
- Wydruki
- 1
- Wyświetlenia
- 547
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a case for the Waveshare UPS Module 3S. Commonly used to power Raspberry Pi Boards, but can be used to power anything that requires 5v.
https://www.waveshare.com/wiki/UPS_Module_3S
This case has:
- Mounting points for the 3S UPS Module Board
- Cutout for the DC in Plug
- Cutout for the Power button
- Hinged lid
You will have to add your own cutout for the DC 5v output.
The board can be oriented in either direction. There's plenty of room to wrap the power cables around the case or loop them between the DC in and Power button.
There are two version of the Case Body:
- Waveshare_UPS_Module_3S-Case_Body_v2b.stl
The board can be secured using an M3x10 bolt with washer and corresponding nut.
The opening for the nut at the bottom of the case is designed to be hot pressed in. - Waveshare_UPS_Module_3S-Case_Body_v3b.stl
The board can be secured using an M3x10 bolt with washer and does not require a nut