1 / 3
Prusa 22mm to 25mm Leadscrew nut drill template — zdjęcie 1
1 / 3

Prusa 22mm to 25mm Leadscrew nut drill template

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Prusa 22mm to 25mm Leadscrew nut drill template

Ocena
0 / 5
Polubienia
5
Pobrania
37
Wydruki
1
Wyświetlenia
372
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

The prusa use 25mm leadscrew nut, which is very hard to find for anything other than 8mm lead.
This template is use to drill 2 extra holes on standard 22mm nut so you can mount it on the stock(or bear) X axis.
Use 3.2mm drill bit is recommended.

Category: 3D Printer Parts

Tagi