1 / 15
SKR Universal case for Bear and Original Prusa frame
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SKR Universal case for Bear and Original Prusa frame I modified the Einsy case to be use with BTT SKR main board. Fit…
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 97
- Wydruki
- 3
- Wyświetlenia
- 1360
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (0)Kolekcje (22)Powiązane
SKR Universal case for Bear and Original Prusa frame
I modified the Einsy case to be use with BTT SKR main board.
- Fit both SKR1.3 and 1.4.
- Added some zip-tie slot for cable management and secure the input,bed,hotend cable.
- Fit both bear and original mk3 frame.
- Compatible with Bear parts.
- Active cooling with 2 4010 blower fans.
- clip.stl is optional, this will be use to secure the wiring. Only needed if you route the cable via the 2nd hole.
Print Settings
Printer Brand:
MK3
Printer:
Prusa i3
Doesn't Matter
Supports:
No
0.2mm
Infill:
30%
Filament:
Any PETG Any
Category: 3D Printer Parts