Kissing Couple Heart 100% printable

This beautiful model depicts a couple sharing a kiss – forming a heart in the process.

• Easy to print, no supports required
• Approximately 6h print time
• no non-printed parts needed
• printable on all 3D-Printers including the A1 Mini without AMS

This model makes a perfect gift for Valentine’s Day or any special occasion where you want to surprise someone with a creative touch. The fully functional gears bring a playful and fun element to the design!

On my profile on makerworld (linked on Profile), you can find more beautiful models, such as a jewelry stand or a love potion.

Bill of Materials:

Assembly Instructions:

1. Slide a Tension Ring Medium (Pos. 9) onto the Gear Holder (Pos. 1)

2. Slide the Connection Rods (Pos. 5) onto the Big Gears (Pos. 3 and 4)

3. Slide a Tension Ring Small (Pos. 10) onto the shaft of each Big Gear (Pos. 3 and 4)

4. Slide the two Small Gears (Pos. 2) onto the lower shafts of the Gear Holder (Pos. 1)

5. Secure the Small Gears (Pos. 2) on each shaft with a Tension Ring Large (Pos. 8)

6. Slide the Big Gear Back (Pos. 3) with the short shaft onto the left shaft of the Gear Holder (Pos. 1) and the Big Gear Front (Pos. 4) with the long shaft onto the right shaft of the Gear Holder (Pos. 1)

Important: Ensure the alignment of the gear teeth is correct!

7. Secure the Big Gears (Pos. 3 and 4) on each shaft with a Tension Ring Large (Pos. 8)

8. Slide the heart left (Pos. 6) onto the middle shaft of the gear holder (Pos. 1). Then slide the heart right (Pos. 7) on the same shaft. Connect the shafts of the hearts to the connection rods (Pos. 5)

9. Secure the heart (Pos. 6 and 7) on the shaft with a Tension Ring Medium (Pos. 9)

10. Secure the heart (Pos. 6 and 7) on the back with a Tension Ring Small (Pos. 10)

11. Congratulations! You are done!