Ender 3 (or any 40xx extrusion) spring feet damper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Damper feet for Ender 3 ( can be used with other 40xx extrusions too). Performance of this model can be adjusted by…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 716
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Damper feet for Ender 3 ( can be used with other 40xx extrusions too). Performance of this model can be adjusted by using 4 or 5 springs or by using different hardness spring.
*2019/8/8 update:
- Added 16mm version for using with 16x20 mm springs. Many springs with different stiffness can be purchased from: https://www.aliexpress.com/item/32962540604.html
Added version for using with rubber feet. Required parts (10mm version)
Top (3d print)
- Bottom (3d print)
- Outer diameter 10mm spring x4
- Rubble band x2
- M3 hammerhead nut x2
M3 10mm length bolt x2 Required parts (16mm version)
Top (3d print)
- Bottom (3d print)
- Outer diameter 16mm spring x4
- Rubble band x2
- M3 hammerhead nut x2
M3 6mm length bolt x2 Required parts (fixed version)
Top (3d print)
- 35x35 mm rubber
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
No
0.12mm
Infill:
50%
Filament:
Creality PLA red
Notes:
Print with NO SUPPORT and high infill rate is recommended.
Category: 3D Printer Accessories