Gridfinity bins for 19mm Dymo tape cartridges
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bins that hold 19mm tape cartridges.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 327
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
These are Gridfinity bins that fit 19mm tape cartridges for several models of Dymo label printers. (The tape is 19mm wide; the cartridges are about 24mm thick.) I made two sizes.
- small: 6 tapes in 2×4 Gridfinity units
- large: 8 tapes in 2×5 Gridfinity units
They are made to the same dimensions and style as @AaronOaks' Gridfinity Dymo 160 Tape Holder and look good together. They are stackable (when empty). They have magnet holes.
I modeled these in Fusion 360. I have included .f3d and .STEP files to help you remix them.
Instructions
Print using any filament, any settings. I used PLA and PETG with 0.2mm layer height and 15% grid infill. (Grid infill for Grid infinity, get it? Okay, that's a sad joke.) Optionally glue 6×2mm magnets into the bottom.