Oil Tank Level Sensor Enclosure (ESP D1 Mini+ VL53L0XV2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ESP and sensor enclosure for level measurement to attach to an oil tank with a BSP G 1 1/2 thread.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 293
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This 3D-printed enclosure is designed for an ESP module (D1 Mini) and a VL53L0XV2 time-of-flight sensor for monitoring the oil tank level of a heating system.
The model is designed for an oil tank with a BSP G1 1/2 thread but can be adapted to other dimensions if needed. Assembly requires two M3x12 screws and one M3x8 screw. For optimal chemical resistance, I used Nylon PA12 filament for printing.
This enclosure enables straightforward and accurate measurement of the oil tank level. In my setup, I monitor the data in Home Assistant using ESPHome.