Handle for 5mm shank #2 Stainless Pallet Knife
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement handle for tools with a 5mm diameter shank. #2 Stainless Pallet Knife
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I broke the handle on the painting knife that came with my printer. This one replaces it.
Shank hole is 17mm deep and 5mm in diameter.
Print with enough walls to ensure the hole portion at least is all solid or use appropriate print modifiers for strength. 5 top and bottom, 4 walls and 40% infill in ABS on 0.2 height and 0.4 width worked for me.
Standard supports build plate only works and by heating the pallet knife shank and using pliers you can add clearance to the hole if it doesn't print round enough for you. CA glue used to secure the shank in handle.