No-Fuss Knob (Hidden Screw)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D-printed knob with a plastic insert. Fix it with an M4 screw, then screw the knob on for a clean, hidden look.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
Easy peasy:
- Insert an M4 (or smaller) wood screw into the hole in the printed insert.
- Screw the insert onto the piece where you want the knob to go.
- Finally, screw the knob over the insert for a secure and tidy finish.
Check the side cut image.
Tips: Print knob on its head. Test the screw first to figure out which side goes in easy (the top in original direction) (I added a 0.1mm tolerance on both the srew and the knob for easier. If really hard, you still van try wax of grease - you will use this only once…). The hole in this plastic screw is not to be very tight - is just to let the wood screw go through).
0.2 ( bigger will mess the thread)
4 walls, 20% infill
The hole thing printed in 17 min for me on “normal speed” (bambuX1C)
I'm adding fusion 360 files if you want to play with it.
:)
Edit: I added a couple of variations for the knob for more diversity!