110 Film Holder for Flatbed Scanner - Short
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Short version of my magnetic film holder for digitizing 110 film, using a flatbed scanner, or DSLR/Mirrorless setup
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 171
- Wydruki
- 2
- Wyświetlenia
- 951
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After designing a couple of different 110 development reels (check my profile for those), I found myself needing a way to scan my 110 films so I designed this magnetic holder. This is the short version (scanns 4 frames at a time), which I like, but I also made a longer version, for people who wanted it. This works really well on my flatbed scanner, but others have used it for digitizing with their digi-cam (DSLR or mirrorless) scanning stations.
To see actual prints of my design, check out the “Makes” tab (I print basically everything I design.)
Print instructions
Printer: ANY (I used a Qidi X-one2)
Rafts: No
Supports: No
Resolution: 0.2
Infill: 20%
Filament: ANY (I used eSun PLA+)
Post-Printing
Post printing is just glueing the magnets into their little holes. The holes are designed to fit inexpensive (I got 50 for $5) 4mm x 2mm neodymium “rare earth” magnets