Ice Cream Pint Lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Novelty lock that allows you to attach a lock to a pint of ice cream. Tested on Ben & Jerry's.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 74
- Wydruki
- 1
- Wyświetlenia
- 818
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Description
A friend asked for a 3d print to lock up a pint of ice cream for their daughter. I didn't find any good models that looked easy to print so I created this one. I tested it on Ben & Jerry's, but it should be flexible enough for most pints. Including the scad if anyone wants to tweak it for other sizes.
update: uploaded the correct top stl.
Print Instructions
Padlock not included
No supports
No raft
Tested in PETG, 0.4mm nozzle, “0.2mm speed”, Mk4 (see .3mf)
Note: It might be a bit big for the Prusa Mini, looks like it will barely fit.
I used a modifier in PrusaSlicer to remove top/bottom layers in the middle of the top for looks.