GM328 Transistor tester case (Original screws)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case for the DIY Transistor tester GM328
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 280
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
There is so much different version of this transistor tester that I didn't find a case for it ... So in the pure DIY spirit I made my own. I hope it will suit someone else's one.
This is a case for the DIY Transistor tester GM328. You can see if it matches yours with the pictures. There are 2 versions of the top of the case.
- One (Top (3mm)) is the one showed on the picture. Using 4x M3*20mm screws because in my first print I didn't account for the size of the screw driver.
- The second (Top (Original screws)) is meant to be used with the original screws provided with the kit. You pre-mount them between the top and the 4 lips passing the screw driver through the top holes (like in the picture).
All the abilities are retained (even SMD testing) except battery power. But this can be solved by drilling a small hole on the side of the case.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
Yes
0.28 mm
Infill:
15 %
Category: DIY