Pin gauge for creating bumper grommets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pin gauge for creating bumper grommets for 1920's to 1940's cars
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Spent way to many revisions trying to get the right profile for a 1936 Nash rear bumper escutcheon/grommet and resorted to creating this tool.
Cars from the 1920s through 1940s that used these that are not popular/common/expensive enough will be missing these parts or they will be severely degraded.
This can be used to create new ones with a proper profile.
You will still need to be CAD capable to create the design. This gives you the needed dimensions. Mine came out pretty good but I expect that someone with professional CAD experience would do even better.
Paying for professional design time would be prohibitively expensive for most owners. Rubber parts manufacturers won't create them without a mandate.
The holes are not quite big enough so I had to drill them out with a .2mm drill. Use 1.75mm filament as the pins.