Glove Hole Plug for Media Blast Cabinet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plug the holes in your sand blast cabinet gloves to keep the wildlife out!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 157
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you have a sand blasting cabinet with long rubber gloves, it's not so nice to stick your hands in and find stink bugs, wasps, or anybody else in there. These are some simple plugs to keep things out of there while not using the cabinet. Add some washers to make googley eyes!
If you need to make adjustments, the cad file is also included. The hole in the middle is intended for removal but I find the outer flange works just as well with my setup.
On this Econoline cabinet, the hole in the steel is 6" and there is a quarter inch foam pad around the circumference. The plug is nominally 5.5" in diameter with a slight taper.