1 / 1
Hel3DWindPower 1:4 scale
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 1 to 4 scaled down model of the Hel3DwindPower_v8 for fast print.
The model has been altered to work with a 2mm vertical axle.
Tolerance is 0.2mm between axle and wall.
I happend to have a steel thread of this diameter which works well for these smaller projects.
The model is cut in half on the build plate with a dowel and will need to be glued together after finishing the print.
The holder has two M4 screwholes separed by 34mm.
Play, learn and enjoy!