Cable Entry Cap for Nevermore Stealthmax using Micro-fit 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cable Entry Cap for Nevermore Stealthmax using Micro-fit 3
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 1
- Wyświetlenia
- 242
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v3.0
This is a replacement Cable Entry Cap for the Nevermore Stealthmax air filter. The original cap does not fit a microfit3, at least not when comparing it to the Molex specifications: the slot for the locking tooth is too narrow. This fits. This is also shorter, so it is possible to push in the connector housing using simple pliers. The “panel” is thicker and within Molex specs, which should make the housing sit tight. The retainer bumps on the side are smaller, which makes it possible to tap this in without filing them down. The panel cutout dimensions are directly from Molex specs, except that the space for the panel locking arms is a tad larger. It is possible to remove the connector by squeezing the locking arms with pliers.
The connector is a three-pin version.