1 / 2
Playmobil - Castle 2x2 Floor 30 07 8810
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Part No. 30078810 / 30 07 8810
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 245
- Wydruki
- 0
- Wyświetlenia
- 515
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (39)Powiązane
Some square 2x2 floor tiles to be put between walls.
Printed in ASA, but any filament should do just fine.
My Settings are:
Variable Layer height with max Quality. (or alternatively 0.16mm)
- 4 Walls,
- thickness of upper wall 0.8mm (or 4 layers),
- thickness of lower wall 4 layers
- 40% infill
- supports on the two outter edges only, Support upper z distance 0.2mm
Prints in around 56min.