Disney Coronado Springs Sign
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sign designed to capture the spirit of the Coronado Springs Resort.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 204
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed the sign to print on my 300 x 300 mm bed. I rotated the sign 45 degrees for maximum size. Feel free to scale the x & y axis as needed for bed size; leave the z axis as-is. Sign has a small keyhole opening in the back for a picture hanger. Command strips should work, too.
The sign is printed with three filament color changes. The filament I used:
- ELEGOO PLA Plus, White https://amzn.to/3Epo10j
- Polymaker Matte PLA, Army Blue https://amzn.to/3CM8OWQ
- Duramic 3D Matte PLA: Wood https://amzn.to/42QjEFS
Print settings: .20mm layer height, 20% infill, no supports. No skirt to maximize size (I used a skirt, but should have skipped it to make the sign a little larger). Use a brim to help with bed adhesion and avoid warping/lifting.
Color changes:
- Layer 0: White
- Layer 20: Beige
- Layer 25: Dark Blue
- Layer 30: White
Set up the color changes in Prusa slicer to assure layer height pauses are correct.
After printing, my sign warped a little bit when it cooled. I submerged it for 5 seconds in hot water (170 - 180F), then placed it on the kitchen counter with a heavy baking dish on it until cool.
Enjoy the sign. Do NOT sell or otherwise profit from this design. If I catch you selling the sign, I will summon the Tiki Gods to rain upon your filament.