1 / 3
MMU3 Auto Rewinder mount for the Prusa enclosure, to use without drybox — zdjęcie 1
1 / 3

MMU3 Auto Rewinder mount for the Prusa enclosure, to use without drybox

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An adapter to attach the auto rewinder to the Prusa enclosure without the (un)original drybox.

Ocena
5 / 5
Polubienia
22
Pobrania
60
Wydruki
2
Wyświetlenia
896
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

As I don't curently have the time and materials to build the (un)original drybox, but still wanted to use the auto rewinder, I designed this to attach the rewinder to the Prusa enclosure without the box.

You also need to print 5 of these PTFE holders, which I can't include here due to licensing differences.

New parts include:

  1.  Mounts to snap the spoolholder assembly on the enclosure's lid. The spoolholder assembly is easily removable, but will stay on when opening the lid, to an extent.
  2. Snap-on holders for the PTFE tubes. I cut a few of the PTFE tubes that were included with the MMU3 in half-ish.
  3. (Optional) Numbers to identify the spools. You need a functional MMU3 setup to print these.
  4. (Optional) Caps for the ends of the rods (18mm version only)

I made parts for both 18mm and 20mm rods, but only tested the 18mm version.

 

Shoutout to the Fixation for (un)original Prusa drybox - all in one remix which I referenced for many measurements.

Tagi