Prusa i3 MK3 PSU cover with rear power input - Fixed Socket Hole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Original Design's supplied STL files for the socket had a wrongly placed top socket holes, as found by me and…
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 74
- Wydruki
- 2
- Wyświetlenia
- 467
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Edit: this is for the silver PSU only!
The Original Design's supplied STL files for the socket had a wrongly placed top socket holes, as found by me and multiple other commenters.
UPDATE 12/5/2021: Original design seems to have disappeared off thingiverse, I think its new home is at prusaprinters: https://www.prusaprinters.org/prints/993-prusa-i3-mk3-psu-cover-with-rear-power-input
I took a look at the .STEP file and the socket hole was in the right place, so I suspect something happened in the original STL export process from STEP to STL.
So what I did was I took the .STEP file and re-exported (in high quality) from Fusion 360. I did not make any changes at all to the design. The STEP files contains the socket w/o Wire gap only in case you were wondering why there's only one version here.
Category: 3D Printer Parts