Fridge Magnet Mjolnir Thor Hammer - 8x3 magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have 8x3mm magnets instead of 6x3mm magnets which the original thing was designed for so I just enlarged the magnet…
- Ocena
- 5 / 5
- Polubienia
- 105
- Pobrania
- 465
- Wydruki
- 13
- Wyświetlenia
- 2385
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have 8x3mm magnets instead of 6x3mm magnets which the original thing was designed for so I just enlarged the magnet hole in tinkercad.
I used a hole diameter of 8.2mm in the design, and my 8x3mm magnet press fits in perfectly and holds without any glue.
The handle is unchanged from the original Thing (https://www.thingiverse.com/thing:2485766). I also uploaded the handle as a file for convenience so you have it all in one spot.
If you prefer to have the magnet enclosed/sealed in the hammer check out this other one here: https://www.thingiverse.com/thing:3314362