1 / 2
Descaler for the LABE series faucet by SLEZÁK - RAV — zdjęcie 1
1 / 2

Descaler for the LABE series faucet by SLEZÁK - RAV

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A descaler designed to be attached to a faucet and used with vinegar.

Ocena
5 / 5
Polubienia
3
Pobrania
29
Wydruki
1
Wyświetlenia
218
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution

------- English version follows. ------- 

Odstraňovač vodního kamene pro vodovodní baterii řady LABE od SLEZÁK - RAV

Odstraňovač vodního kamene navržený pro nasazení na vodovodní baterii a použití s octem.

Rozměry přesně pro řadu LABE od SLEZÁK - RAV:

  • SLEZÁK - RAV - LABE L526.5CMAT - Páková umyvadlová baterie
  • SLEZÁK - RAV - LABE L554.5CMAT - Páková vanová baterie
  • SLEZÁK - RAV - LABE L508.5/8CMAT - Páková dřezová baterie
  • Pasuje také na jiné barevné varianty stejné produktové řady.

Jednoduše nasaďte a naplňte běžným kuchyňským octem. Nechte působit přibližně 1 hodinu, poté sundejte a očistěte baterii měkkým kartáčkem nebo čistým hadříkem. V případě potřeby opakujte.

Tisk z TPU, aby byl pružný a mohl se přizpůsobit baterii při nasazování.
Tisknuto se 3 stěnami, aby nebylo potřeba výplně. Nepotřebujete žádné podpory ani okraj.

------- English: -------

Descaler for the LABE series faucet by SLEZÁK - RAV

A descaler designed to be attached to a faucet and used with vinegar.

Dimensions precisely for the LABE series by SLEZÁK - RAV:

  • SLEZÁK - RAV - LABE L526.5CMAT - Basin lever mixer
  • SLEZÁK - RAV - LABE L554.5CMAT - Bath lever mixer
  • SLEZÁK - RAV - LABE L508.5/8CMAT - Sink lever mixer
  • will fit the other color variants of the same product line

Just attach, fill with basic kitchen vinegar. Leave on for about 1 hour and then remove and lightly scrub the faucet with soft brush or clean cloth. Repeat if needed.

Print from TPU to be flexible so it could be attached to the faucet. 
Printed with 3 walls to avoid infill. No supports or brim needed.

 

Tagi