FLASHHOBBY D2826 Motor Mount | D-Series RC Motor | Customizable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created a motor found for the FlashHobby D-series motor collection because I couldn't find it elsewhere.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 203
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Use the f3d file to customize in fusion360! Currently, there is a helical gear on there, but simply delete that if needed!
Be sure to use supports! Depending on what you are adding to the design, you may consider changing the print orientation.
Mount this to your motor with m2 screws (longer than m2x8mm!). Again, you may need different length m2 screws depending on what you add to the model!
Note: I am not sponsored or taking the identity of FlashHobby, I am just a member of the 3dprinting/rc community that wants to contribute with CAD models.