Haslab Ghostbusters Two in the Box Trap Grill Frame Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A printable frame that you can stick your own metal mesh into for a more realistic look in the ghost trap.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 221
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a printable frame that you can stick your own metal mesh into for a more realistic look in the Haslab Two in the Box ghost trap. It's been designed about .5mm oversized compared to the original so that it will fit tightly in the interior. The removal notch is retained in this design.
I've provided two versions of the frame - one is completely whole for a single print, or you can print the top and bottom separately and glue them together. If you print the whole frame, assuming you're using .1mm layers, pause it around layer 13 or 14 to lay the mesh in and resume the print to seal it into the frame.
I made mine with the #10 stainless mesh at https://amzn.to/4g5toyP.