Gridfinity bin for Dymo Rhino 4200 label maker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bin holds the label maker and instruction book.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 374
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
This is a Gridfinity bin that holds a Dymo Rhino 4200 label maker. It has a slot on the side for the 4200's instruction book. The bin is 5×4 Gridfinity units.
It is stackable when empty. It has holes for magnets on the bottom.
The tape cartridge bins in the photos are @AaronOaks' Gridfinity Dymo 160 Tape Holder and my Gridfinity bins for 19mm Dymo tape cartridges.
I modeled this bin in Fusion 360. I have included the .f3d and .STEP files to help you remix it.
Instructions
Print settings don't matter. I used PLA 0.2mm layer height, 15% infill, but it is not critical. 6×2mm magnets can be glued into the holes in the bottom.