Table saw miter guide for angled cuts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A guide for setting up mitered cuts for n-sided shapes from 5 to 10 sides.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 1100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
These are miter guides for setting your table saw miter gauge for making n-sided cuts. For example, if you want to make an 8 sided object, you would use this guide to set the angle on your table saw miter gauge so that the angles are set for 8 sides.
With the numbers facing up, place the miter bar in the guide for the desired number of sides and align the miter fence to be flush with the edge of the guide. Then lock your miter fence in place and make the necessary cuts. The guide sets the miter fence to the proper angle for the number of sides.
This was tested on the miter fence provided with a PM-1000 table saw. It also works with the Incra miter fence system. Note that tested pieces were printed at 0.2 mm height with standard infill, so there may be some difference/slack if you print with other configurations.