1 / 4
Sovol SV08 Cooling Fan Shroud - Air Deflector - HEAVY DUTY — zdjęcie 1
1 / 4

Sovol SV08 Cooling Fan Shroud - Air Deflector - HEAVY DUTY

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Heavy duty 3D printable cooling fan shroud replacement for Sovol SV08. Air deflector replacment.

Ocena
0 / 5
Polubienia
18
Pobrania
109
Wydruki
0
Wyświetlenia
677
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Modified original source part from SOVOL for printability and strength. Added gussets and thickened critical portions to strengthen this over the original bracket and to properly adapt to 3D printed form factor. Also slightly modified parts of geometry for printability. Printed mine out of standard PLA with organic supports at .2mm layer height with a .4mm nozzle on Bambu P1S. When complete, drilled the fan mounting holes out with a 1/16 in drill bit and that allowed the standard screws that come with the original bracket to be threaded into the plastic directly. Snug fit but worked well and has not come apart! 

 

The plastic one on my printer broke off after using it for a while, so hopefully the reinforced version lasts longer. Works just as well as the original did. 

Tagi