Copper Sulphate Half-Cell PVC adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple adapter to allow you to attach a standard 1-1/4" Copper-copper sulphate electrode to 1" PVC
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple adapter to allow you to attach a standard 1-1/4" Copper-copper sulphate electrode to 1" PVC.
It slips inside the flared end or a 1" coupler and the probe fits inside, secured with a ¼" nut using the existing stud. You can then use another thin ¼" nut to secure a ring terminal for the lead. We use this to create a staff/cane to hold a multimeter and the probe in one hand to free up your other hand to connect the test lead to the structure. Much easier than having to stick the probe in the ground each time (especially in the snow) and much cheaper to make than buying a “professional” level cane. I'm testing with an MC Miller probe, but it should work with Tinker-Razor and others.
I'm still developing and testing this part. It is sturdy but I have broken a couple, so avoid too much side load for the time being. My test prints are in ASA at 0.12 layer height, supports enabled.