WD Mycloud EX2 Ultra feet adapters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapters that slot into the WD Mycloud EX2 Ultra allowing you to use TPU or rubber feet for noise isolation.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I hated how my WD Mycloud EX2 Ultra vibrated on the shelf since mine was missing the rubber feet from the factory. I made this adapter that fits into the slots at the bottom of the device allowing you to model or use premade models of vibration reducing feet. The stub has a 6.10 mm radius (12.20mm radius) and is about 2.5 mm high.
I personally use the feet made by print.tech3d here:
https://www.printables.com/model/473562-bambu-lab-x1-p1p-p1s-anti-vibration-feet-tpu-bambu
This adapter and TPU feet significantly reduce the overall noise from this EX2 Ultra.