Collapsible Stock For NPC-9 Dart Blaster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a stock I designed for the NPC-9 by CheckYourVector. It bolts onto the flat pistol stock and is collapsible.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 435
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a stock I designed for the NPC-9 dart blaster by CheckYourVector. It bolts onto the flat pistol stock and is collapsible. To assemble it you will need some super glue, a pen spring, three m3x10mm screws, four m3x20mm screws, and four m3 hex nuts. Optionally you can also use 1/8" x ¾" aluminum or steel to make the stock bars using the included 3d printed bars as a cutting guide. This is recommended as the printed ones are a bit flimsy. I have made a assembly guide here:
https://docs.google.com/presentation/d/1ykYpmG6VMUu5-gBZYw4kldUvtjQhZgKzCxgeguX9K9I/edit?usp=sharing
Other notes:
- All files are already in the correct printing orientation.
- Only the Stock shell needs supports
- All parts can be printed at a minimum of 25% infill besides the stock bars which need to printed at 100% unless your using them as a template.