Support Fanatec CSL pedal fot playseat challenge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Support de fixation pour le Fanatec CSL 2 pedal sur un Playseat Challenge
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 611
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Support pour pedalier CSL 2 pedales pour playseat challenge. Montage testé et approuvé, conception par mes soins, si besoin d'une modification n'hésitez pas.
Pour le montage vous aurez besoin de M4x30mm 8x, ecrous M4 8x, vis M8 x35mm 2x, ecrou M8 2x et rondelle M8 2x pour les supports arrières et de 8 vis M3 x 40mm ainsi que 2 M6 x 25 Hexagonal
Je recomande 4 parois au minimum ainsi que 25% de remplissage motif grille.
Support for pedalier CSL 2 pedals for playseat challenge. Mounting tested and approved, design by me, if need a modification do not hesitate. For mounting you will need M4x30mm 8x, M4 8x nuts, M8 x35mm 2x screws, M8 2x nut and M8 2x washer for the rear supports and 8 M3 x 40mm screws as well as 2 M6 x 25 Hexagonal
I recommend 4 walls at least as well as 25% grid pattern filling.