1 / 1
M3 to M1 Spacer for DJI O4 Air Unit Lite
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
simple spacer
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
M3 to M1 Spacer to mount the DJI O4 Air Unit Lite on a Tinywhoop.
If your printer cannot product small holes with accuracy, use a 1mm drill bit to bore out the hole or use the M1 screw itself.