Takara Tomy (Thomas and Friends)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spare "Engine wheel" and "Coach connecting link" for Takara Tomy Thomas model train set
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 130
- Wydruki
- 0
- Wyświetlenia
- 395
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
I had a Takara Tomy Thomas train set, Authors Edition (Britt Allcroft 1999), but its wheel and connecting links were broken due to it being very old. I thought to restore it by rebuilding it in Rhinoceros and 3D printing it!
now it's back to its original state and kept it in Showcase
Printer setting (Cura Slicer):
Extrusion width (overall): 0.4 ("Super quality" print option)
Perimeter generator: skirt
no change in print orientation
Support:
printed only “center link” with supports; you can try it without it too (I haven't tried though).
Notes:
The holes of the connecting links are made for 2.5mm screws. Before screwing, drill and shave off a little bit for the screw to fit smoothly, or else it's gonna break the printed part at print resolution seams.