1 / 5
Laserpecker 2 / LP2 Peg Board base
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
peg board for positioning stuff repeatably accurate in the center of the workspace of a LaserPecker 2
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 93
- Wydruki
- 1
- Wyświetlenia
- 290
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (10)Powiązane
I created this because I wanted to have repeatably accurate results lasering. The existing base I tried on was too small for my LP2 base oddly by around 5mm. This is why I designed this my own.
Features:
- its a loose enough fit to slide it back and fourth under the laser shield, without fiddling with the height (but depends on the stuff you want to lasermark..)
- i also made a circle to mark the center point of the lasers work area. why? because everything you load up in Laserpecker Designspace is loaded already centered! this way its easier to position your pins without guessing the centerpoint.
- the pins or other mounting options can be changed/depending on your specific case. CAD / STEP / Fusion Modell added.
this worked great for me! results where awesome
PS: Printed in PETG. but I think you can use whatever u want… should be fine
really easy print. no special stuff to know …