RamjetX E-Brake Neoprene Spring Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi Internet Rally and Drift Enthusiasts! Again, it's a upload and run for me till I get home later to update the…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 410
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Hi Internet Rally and Drift Enthusiasts!
Again, it's a upload and run for me till I get home later to update the description
It's simply a replacement spring return mechanism mod for the Chinese Ebay e-brakes.
Heaps of mods out there for loadcells and variable sliding pots etc... I'm just using a switch that I put on a few years ago. Mod used to be on the OZNZ forums but has since been lost in the move.
Anyway, I had a bag full of Neoprene discs that I used to use in UHF radio speaker mounts for anti-vibration. They're 38mm in diameter because that was the size of the die punch we used.
So with a few of these sandwiched together, it made a quiet but building resistance for my ebrake and used some parts I had laying around.
With the right length bolt, you'll be able to fully adjust this to fit the same neoprene in there, or a squash ball, or anything you want to squish up for resistance.
Hopefully you find it usefull...
Cheers,
RamjetX
Category: Video Games