1 / 3
Base for Sunlu S2 base with vents for Kobra Neo — zdjęcie 1
1 / 3

Base for Sunlu S2 base with vents for Kobra Neo

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A base to be able to mount Sunlu S2 Dryer (moded with custom vents base made by @Tomcat54) on top of Kobra Neo printer.

Ocena
0 / 5
Polubienia
5
Pobrania
17
Wydruki
0
Wyświetlenia
276
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

A base to be able to put Sunlu S2 Dryer (moded with custom vents base made by @Tomcat54) on top of the printer, replacing the original spool holder.
https://www.printables.com/model/1051137-sunlu-s2-base-with-ventilation-and-fastening-point

taking advantage of the holes included in the original model.
and added a PTFE tube connector size M10 to the back side to keep thing organized.

my setup is with this mod by @GaiusPupus_11840
https://www.printables.com/model/1098019-sunlu-s2-airflow-optimizer-active-humidity-exchang
which improved the drying capabilities even further.

My design can be printed
- PLA (as it is not in contact with heat)
- 3 or more wall
- 20% infill
- no support needed if you enable the sacrificial layer for the holes (OrcaSlicer) 

Made for Anycubic Kobra Neo, but it might work with other similar kobra models, no guarntees.
 

Tagi