Hook for 2020 extrusion - lower hook accommodates a spin-and-lock T-nut
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Can be used for a tensioning spring - such as my use on a hot wire foam cutter
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 88
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Hook for 2020 extrusion - lower hook accommodates a spin-and-lock T-nut.
Screw holes are for M5 screws.
Hardware list:
- Two (2) M5 x 8mm screws
- One (1) M5 T-nut (spin and lock type)
- One (1) M5 nylock nut
This can be used for hooking a tensioning spring - such as my use on my DIY hot wire foam cutter that I made from leftover aluminum extrusions that used to be an Ender 3 v2 printer.
In this “before” photo, I was using a not-as-good solution for attaching the spring. Below are before and after pics of the attachment.
BEFORE (attachment method not as good):
AFTER (way better):
Overview: the lower hook accommodates a spin-and-lock T-nut
Also check out my:
- 4040 End Cap - 4 variations to choose from - https://www.printables.com/model/1157803-4040-end-cap-4-variations-to-choose-from