1 / 2
HueForge Mystik
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ich hoffe es gefällt euch! Würde mich über Likes, Kommentare und Makes freuen!
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to dark Gray
At layer #12 (1.04mm) swap to light Gray
At layer #16 (1.36mm) swap to White for the rest.
i printed with esun PLA
hope you all enjoy :-)