K2 Plus Riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Risers to give more head room above the printhead and allow feeding of brittle filaments without snapping
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 3397
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
You will need to print each model 4 times, preferrably in ABS or PETG to withstand the chamber temperatures. The models are designed to be printed without supports lying on the Creality logo. You will need to add 3mm M3 Brass inserts, however do not insert them all the way, the wall is slightly thinner.
Attach the top pieces using 3mm M3 Brass inserts (these can be inserted fully)
All 28 screws should be about 10mm long.
You will also need 5mm thick sheets for the panels and top. I would recommend Acrylic, but you do you. They need to be cut to the following dimensions:
1x (425x400mm)
2x (380x210mm)
2x (405x210mm)
In the middle of your new lid, drill a 9mm hole and insert a Push-Fit Connector to add a PTFE Tube. If you use a longer PTFE Tube and do the same thing to your Creality Space Pi, you can print directly from there. Originally I planned to print with the spool inside the Riser, as you can see from the bearings, but the spool is far to close to the Printhead and Filament will jump off the spool with ALL filament types and get tangled up.
Also PLEASE remove your standard PTFE Tube inside the printer when not in use. It will get bent if you let it dangle.
I did upload .stp and 3mf files, but would appreciate my name not be removed. It is purposefully placed so that it is not visible when assembled unless you go looking for it. Remixes are allowed, without name removal.