1 / 2
Airsoft ASG Scorpion Evo Grip Fu HPA Grip — zdjęcie 1
1 / 2

Airsoft ASG Scorpion Evo Grip Fu HPA Grip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Kung Fu style grip for the HPA version of the ASG Scorpion Evo

Ocena
5 / 5
Polubienia
11
Pobrania
83
Wydruki
0
Wyświetlenia
838
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Kung Fu style grip

Images shamelessly taken from the Jaeger Precision video

This Grip only works with the HPA version of the ASG Scorpion Evo. For AEG grips, check my other Evo projects.
This is designed for Evos that have the Battery in the top compartment. You might be able to fit the battery/fcu wire through the center hole in the grip along with the IGL.

MAKE SURE YOU KNOW WHAT YEAR YOUR EVO WAS PRODUCED.
2018 and newer Evos are a bit different from the older, pre-2018 Evo.
If you pull back the bolt and your gearbox has the ASG logo, it is most likely 2018 or newer. If it's blank, it's pre-2018

 

The Open grip has no bottom plate.
There are two bottom plates, one for the OG line with the thread at the tap end, and one for custom IGLs
The grip is designed for self tapping screws, but M2.5/M3 screw might also work to hold the plate on. The screw holes are 2mm diameter

Tagi