Comgrow T300 outrigger gantry camera mount - cover for X stepper motor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement cover for stepper motor, secured with the original solitary screw.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 35
- Wydruki
- 1
- Wyświetlenia
- 161
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
The outrigger allows different types of cameras. The holes should be wide enough for a standard camera screw. Clip to the upright, bolt your camera to the flat or otherwise be creative. It's long enough for a wider camera to have a clear view.
Comgrow designed this to secure with a single screw on one end. Comgrow's solution was to have a couple of plastic nubs in the cover to hook into some spots. Works great if there isn't some load pulling it down. To that end, I designed the part with some exaggerated nubs to apply extra tension to the unsecured end. Whether that turns into good friction or not, you'll have to let me know. I located the camera mount to keep things tucked back and away from the moving parts.
I did not need any supports to print the model as is. The long bridges seemed to work great, but your mileage may vary. Printed great at 0.2 layer height, 0.4 nozzle diameter, 20% adaptive cubic infill. If you are having trouble with the bridges, you can lower your layer height to 0.15 or even 0.10 mm. Shorter layer heights = easier bridging.