1 / 4
Main Street USA Emporium Sign at Magic Kingdom — zdjęcie 1
1 / 4

Main Street USA Emporium Sign at Magic Kingdom

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D rough model (scan) of the Main Street USA Emporium sign.

Ocena
5 / 5
Polubienia
13
Pobrania
20
Wydruki
1
Wyświetlenia
154
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I created the model using the Kiri Engine photogrammetry app for iPhone, with final editing and repairs made in TinkerCad. 

The scan didn't capture much lettering detail, so I cut black vinyl letters with my Cricut machine. The lettering SVG file is included. 

I used grey PLA to print, then painted with Behr Hammered Brown Gloss spray paint. After I applied the lettering, I sprayed the piece with clear acrylic. Finally, I added some small brass screws.

Printed with .20mm layer height; no supports (it's a solid model). Any infill will work, 20% (or even a little less) is fine. 

This was my test print, so I printed it small. If I do another, I'll increase the size to cover the full print bed. 

Shout out to @frankattack, who did this identical project with different software. Our results are startlingly similar:

https://www.printables.com/model/443217-mk-emporium-plate-photogrammetry-test

Frank mentions that he may try to scan the plaque again for higher quality. My fingers are crossed!!