Honeycomb Alpha/Bravo Mousepad
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mousing surface for the top of the honeycomb alpha or bravo flight controllers
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 153
- Wydruki
- 0
- Wyświetlenia
- 774
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have a cockpit, but no where to really use my mouse that is stable, thus using the mounting screws on the top of my bravo, I made this print. I opted to double stick tape a rigid mouse pad on top of this, since i had it, but it should work fine without also.
Update: V3 has been graciously tested by @Rod117_341361, and confirmed to fit well. As such, I would recommend printing that version for anyone using this model!
I used polymaker ABS, 3 walls, 3 tops, 3 bottoms and 25% infill, i'd probably go up to 4, but it worked fine, pla would likely be fine in these settings.