MPCNC "C" 3/4" Conduit Endcap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple endcap for 3/4" conduit found in the US for use in an MPCNC or LowRider build.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
I saw endcaps for other builds for MPCNCs in other pipe sizing so I wanted to make an endcap of my own to share with other builders. It's a nice addition to keep the dust out of one more place and to make the machine look a little bit nicer. It's all friction fit and can be removed with a pair of pliers and not too much force. If all the other parts are printed to tolerance, it should fit in with the conduit and the corner blocks and ganrty rails.
Print with 0.30mm layers since it's not that important to detail.
15% infill so it has enough flexibility to have a small amount of spring.