MiSTer N64 SNAC 4P Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small case with N64 inspiration for a MiSTer N64 SNAC 4P controller connector board.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 290
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A friendly heads-up:
This case was a snug fit for my PCB, but please be aware that not all boards are manufactured with the same dimensions. The one I used was slightly off-center, so your mileage may vary.
Also, keep in mind that the screw holes are designed for M3x10 screws, which is what I had on hand. If you're using screws with a different head size, you might need to slightly modify the recesses in the top part of the case.
STEP and 3MF files are attached.
This might not be the most practical design, since the connector is at the bottom. However, it was made this way by request, and I wanted to recapture that classic Nintendo 64 feel. This is the design I came up with! :)