Aircraft Oil Filter Drain Funnel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When I change the oil in our Piper Cherokee 6 (IO-540), I need a place to sit the filter (Tempest AA48110-2) to drain...
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 111
- Wydruki
- 0
- Wyświetlenia
- 536
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When I change the oil in our Piper Cherokee Six (IO-540), I need someplace to sit the oil filter (Tempest AA48110-2) to drain. The funnel fits inside my oil drain container and also an empty oil bottle. Interior diameter of the filter-side of the funnel is 98mm (3.85"). Similar filters will likely fit.
It will also hold your filter media to drain for a few days before you inspect.
Printed upside-down with no supports and "standard quality" - 0.2mm.
I used PLA, so it's not a good idea to drain hot oil through it.
Print Settings
Printer: Creality Ender-3 Max Neo
Supports: No
Resolution: .20
Infill: 20%
Filament: Any PLA
Notes:
My print had a few stray strands of filament inside near the base of the narrow cylinder. A little sanding with 120 sand paper cleaned it up.
Designed with Fusion 360