1 / 19
Oblivion Modular Camera Mount — zdjęcie 1
1 / 19

Oblivion Modular Camera Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Top mount for the TBS oblivion pod so you don't need to use the dumb gopro strap. Can also be used to hold fins or…

Ocena
0 / 5
Polubienia
1
Pobrania
12
Wydruki
0
Wyświetlenia
256
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

Top mount for the TBS oblivion pod so you don't need to use the dumb gopro strap.
Can also be used to hold fins or other accessories.

Works with both the standard pod and the GoPro style pod.

People have reported better luck printing the base plate (dovetail) in TPU instead of PLA

Assembly Guide

Standard Pod

Print the 'curve-adapter' in TPU to act as a shim on the curved surface
Print the 'dovetail'
Drill / Melt 2 holes into the pod to keep part attached (use any m3 screw)

GoPro Pod

No need for the 'curve-adapter'
Drill / Melt 1 hole in the top of the pod (use any m3 screw)

STL files are provided if you want to make your own designs compatible with the rail system.

Open Source: Fusion 360 original files available here https://a360.co/2mh3bVF

The dimensions of the rails are 3.5mm holes, spaces 6mm apart with a total interior width of 6mm

Total weight of rail (including the fin) is 3 grams.

Category: R/C Vehicles

Tagi